HUSQVARNA 346XP MANUAL PDF
Workshop manual. English. XP. For Husqvarna Parts Call or Workshop manual. 90 , , XP, For Husqvarna Parts Call or XP, XPG, Xp E-tech, XPG E-tech, , G, E-tech, G E- tech, TrioBrake. Please read the operator’s manual carefully and make sure.
|Published (Last):||27 October 2006|
|PDF File Size:||14.80 Mb|
|ePub File Size:||15.74 Mb|
|Price:||Free* [*Free Regsitration Required]|
If you have spilt fuel or chain oil on the saw. Turning the screw clockwise will reduce Page 12 2 Sharpening your chain and adjusting hisqvarna clearance The risk of kickback is increased with a badly sharpened chain! When you buy any of our products we guarantee the availability of professional repairs and service. A Husqvarna chain saw can be equipped with different types of airfilter according to working and weather conditions, season etc.
The following engine speed applies: Table Of Contents Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk. By pressing ‘print’ button you will print only current page. Stop Switch 5 Vibration damping system Your chain saw is equipped with a vibration damping system that is designed to minimise vibrations and make operation easier. By being hysqvarna you reduce the risk. The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything.
Chainsaw Husqvarna Operator’s Manual Husqvarna chainsaw operator’s manual 44 pages.
To maintain cutting performance you must file back the raker teeth to the recommended height. B Finish by cutting from above so that the two cuts meet.
Page 22 C Clearing the trunk and preparing your retreat Remove any branches that are in the way. Check the throttle trigger for smooth operation. Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice. Carry the saw with the bar and chain pointing backwards. If you get a violent kickback while the kickback zone of the bar is farthest away from you You must use approved personal protective equipment whenever you use the machine.
A blocked mesh will cause the engine to overheat and may lead to serious Check that the chain brake is in disengaged position by moving the front hand guard towards the front handle. Careless or incorrect use can result in serious or fatal injury to the operator or others. Regularly check that the muffler is securely attached to the chain saw.
Page 11 majual Cutting equipment designed to minimise kickback Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback. Husqvarna Workshop Manual 50 pages. Press the throttle lock and make sure it returns to its original position when you release it.
HUSQVARNA XP OPERATOR’S MANUAL Pdf Download.
The saw is supplied from the factory with the screw set to position 2. C Clearing the trunk and preparing your retreat Remove any branches that are in the way.
Kickback is usually quite mild, husqvwrna it can sometimes be very sudden and violent. Always use special chain oil with good adhesive characteristics.
H Bar Check regularly: If the muffler on your saw is fitted with a spark arrestor mesh this must be cleaned regularly. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small.
Wipe off the spill and allow remaining fuel to evaporate. Otherwise the clutch can come loose and cause personal injuries.
Winter use – Husqvarna XP E-tech User Manual – Page 37 of 44 |
Maintenance First adjust the L-jet, then the idling screw T and then the H-jet. The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes. Aim the tip of the saw at a light coloured surface about 20 cm maual. If you have more questions, contact your servicing dealer.
Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of 436xp if an accident does happen. Got it, continue to print.
Husqvarna 346XP 351 User Manual
Chain Catcher The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes. Enter text from picture: Spark plug The spark plug condition is influenced by: Chain saws can be dangerous!
Please read these instructions carefully and make sure. Take off the bar nuts and remove the clutch cover. Please read the instructions carefully and make sure you understand them before using the saw.
Daily Maintenance Below you will find some general maintenance instructions. Page 5 1 Chain brake and front hand guard YOUR chain saw is equipped with a chain brake that is desig- ned to stop the chain immediately if you get a kickback.
Never carry or hang the saw by the trigger. When you use a chain saw vibrations are generated by the uneven contact between the chain and the wood you are cutting. Remove these with a file if necessary. General Rules General rules If you understand what kickback is and how it happens then you can reduce or eliminate the element of surprise.